Hexin-technology HXSP-1002A 2-Port RS-232 to Ethernet Serial Device Manuel d'utilisateur télécharger pdf (Page 5)

RS-232

RS-485

RS-422

TXD

D+

RX+

RXD

D-

TX+

RTS

RX-

CTS

TX-

DSR

FULL

GND

DTR

DCD

【Software installation and setting】

1 Set the IP address of the device

The IP address of the device and the PC must in the same subnet network

(the default IP address of the device is 192.168.1.233). First, must make the IP address of

the device in the same subnet network of PC.

If they are not in the same subnet network or the IP address have been used by another device,

Use Telnet change the IP address of the device

1 “Start”------“all programs”------“Running”

Input default IP address of the device “Telnet: 192.168.1.233”

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Hexin-technology HXSP-1002A 2-Port RS-232 to Ethernet Serial Device Manuel d'utilisateur Page 5